X96MaxPlus搭建Armbian
准备工作
-
确认
X96Max+版本为X96MaxPlusQ2- SoC:S905X3 + 4GB 内存 + 64GB 闪存+ 1000M 网口 + 2.4G/5G 双频 WiFi + 蓝牙
-
ophub/amlogic-s9xxx-armbian[Github] 根据型号下载系统镜像
- Armbian_24.8.0_amlogic_s905x3_bullseye_6.6.36_server_2024.07.01.img.gz [Releases/Armbian_bullseye_save_2024.07]
-
balenaEtcher - Flash OS images to SD cards & USB drives
刷入镜像至U盘
-
打开balenaEtcher
-
Flash from file->Armbian_24.8.0_amlogic_s905x3_bullseye_6.6.36_server_2024.07.01.img.gz->Select Target -
选择U盘（请备份好u盘中的重要文件）
-
Flash-> 刷完之后 弹出u盘
boot dtb 配置
-
插入U盘 -> boot驱动器并打开
-
找到并修改
uEnv.txt文件的FDT参数FDT参数来源于BOOT/dtb/amlogic下以.dtb为扩展名的文件- 版本为
X96MaxPlusQ2对应为meson-sm1-x96-max-plus-q2.dtb
FDT=meson-sm1-x96-max-plus-q2.dtb
盒子 U盘启动
-
断电，插入U盘
(记得插入USB3.0口，否则可能不识别) -
插进AV口按下里头的复位键，不松开。(可用牙签或者较小的螺丝刀)
-
上电，看到X96的封面就可以松手
控制LED显示屏
-
登录到 Armbian 系统→输入命令：
armbian-openvfd
备份/恢复 EMMC 原始系统
-
请从 TF/SD/USB → 启动 Armbian 系统 输入命令：
armbian-ddbr -
根据提示输入
b备份系统r恢复系统
刷入EMMC
-
ssh或终端中运行以下命令（以root的身份）
armbian-install -
据盒子版本来填入ID，例如
X96MaxPlusQ2版本就填入508详情 -> Armbian_24.8.0_amlogic_s905x3_bullseye_6.6.36_server_2024.07.01.img.g
root@armbian:~# armbian-install [ STEPS ] Installing Armbian to internal eMMC... [ STEPS ] Checking dependencies... [ INFO ] Dependency check completed. Proceeding installation... [ STEPS ] Initializing the environment... [ INFO ] Use mainline u-boot: [ no ] [ INFO ] Use ampart tool: [ yes ] [ INFO ] Show all devices: [ no ] [ INFO ] Internal eMMC : [ /dev/mmcblk2 ] [ STEPS ] Start selecting device... ----------------------------------------------------------------------------------------------------- ID SOC MODEL DTB ----------------------------------------------------------------------------------------------------- 501 s905x3 X96-Max+_100Mb meson-sm1-x96-max-plus-100m.dtb 502 s905x3 X96-Max+_1GB meson-sm1-x96-max-plus.dtb 503 s905x3 X96-Max+(OverClock) meson-sm1-x96-max-plus-oc.dtb 504 s905x3 X96-Max+(IP1001M) meson-sm1-x96-max-plus-ip1001m.dtb 505 s905x3 X96-Max+_A100 meson-sm1-x96-max-plus-a100.dtb 506 s905x3 X96-Max+_2101 meson-sm1-x96-max-plus-2101.dtb 507 s905x3 X96-Max+Q1 meson-sm1-x96-max-plus-q1.dtb 508 s905x3 X96-Max+Q2,X96-Air-Q1000 meson-sm1-x96-max-plus-q2.dtb 509 s905x3 X96-Air-1Gb meson-sm1-x96-air-gbit.dtb 510 s905x3 X96-Air,X96-Max+100W,100Mb meson-sm1-x96-air.dtb ----------------------------------------------------------------------------------------------------- 511 s905x3 Tencent-Aurora-3Pro meson-sm1-skyworth-lb2004-a4091.dtb 512 s905x3 HK1-Box,Vontar-X3 meson-sm1-hk1box-vontar-x3.dtb 513 s905x3 HK1-Box(OverClock) meson-sm1-hk1box-vontar-x3-oc.dtb 514 s905x3 H96-Max-X3,Infinity-B32 meson-sm1-h96-max-x3.dtb 515 s905x3 H96-Max-X3(OverClock),B32 meson-sm1-h96-max-x3-oc.dtb 516 s905x3 Ugoos-X3 meson-sm1-ugoos-x3.dtb 517 s905x3 Ugoos-X3(OverClock) meson-sm1-ugoos-x3-oc.dtb 518 s905x3 TX3-1Gb meson-sm1-tx3-qz.dtb 519 s905x3 TX3-1Gb(OverClock) meson-sm1-tx3-qz-oc.dtb 520 s905x3 TX3-100Mb meson-sm1-tx3-bz.dtb ----------------------------------------------------------------------------------------------------- 521 s905x3 TX3-100Mb(OverClock) meson-sm1-tx3-bz-oc.dtb 522 s905x3 A95XF3-Air-1Gb meson-sm1-a95xf3-air-gbit.dtb 523 s905x3 A95XF3-Air-100Mb meson-sm1-a95xf3-air.dtb 524 s905x3 X88-Pro-X3,X99-Max+,Transpeed-X3+ meson-sm1-x88-pro-x3.dtb 525 s905x3 Whale meson-sm1-x96-max-plus.dtb 0 Other Customize Enter-custom-dtb-name ----------------------------------------------------------------------------------------------------- [ OPTIONS ] Please Input ID: 508 -
选择分区格式 -> ext4 (即输入
1) -
耐心等待拷贝文件进入EMMC ，速度由u盘/sd卡内系统的大小以及u盘/sd卡读写的速度影响
-
写入EMMC结束 -> 先运行
poweroff拔下u盘（sd卡）再拔插一下电源